Biggest tires no fenders.

chevyok06 said:

18.5

Click to expand...

So if built before April 12, 2002 it would of been 19.75, after that date 19
If thats right someone must of replaced the suspension
Heck the 03 I bought last fall with 81,000 was over an inch and a half below new stock

Must have this thing has 200k miles. Lol. So with that measurement you think I will be OK with the tires in getting Monday? I don't mind some rubbing lol.

chevyok06 said:

Must have this thing has 200k miles. Lol. So with that measurement you think I will be OK with the tires in getting Monday? I don't mind some rubbing lol.

Click to expand...

They will rub, how much hard to say depending on brand, type ( AT/ MT etc )
Heck 245-70-16s rub on some when they were brand new
TJKJ ran that size on his 02 when it was brand new but had rubbing right from the get go, lower it 1/2-3/4 inch or more and yes is the answer

Woo hoo they fit no rubbing to speak of (yet). Super happy with my 300$ tires

Glad to know at least you like them and they work for you, just be careful
Straight on you maybe ok until you hit a bump, or hit a rut while turning etc.
LCG is good to a point, BUT then you still need better springs to control the ride and handling.
My 04 with over 4 inches of lift will flat blow a stock KJ away on a good twisty road

That close up of Clarence is with the wheel turned to get it as close to the punch weld as I could. And as far as twisties go, that's what I have my other toy for this is just a beach toy. But if you want to go play on the twisties I will bring this instead.

chevyok06 said:

That close up of Clarence is with the wheel turned to get it as close to the punch weld as I could. And as far as twisties go, that's what I have my other toy for this is just a beach toy. But if you want to go play on the twisties I will bring this instead.

Click to expand...

Every now and again I think I'd like to have one of those for fun, but then I borrow my buddies for a day and have to crawl out of it :icon_lol:
BUT I start reading on Flyin' Miata's site and their 430-hp General Motors LS3 V8 under the hood and my thoughts change again :ROFLJest:

tommudd said:

John317s worn out 245-75-16s on stock suspension

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

after we did some magic on it

You must be registered for see images attach

Click to expand...

Sweet looking Jeeps! I'm a newbie to this so I have some questions, what years are those KJ's?

when you stated "did some magic on it", did you lift the Silver KJ?
What are the lifts on each of those?

and do they both have the ARB front bumper?



thanks!

chevyok06 said:

That close up of Clarence is with the wheel turned to get it as close to the punch weld as I could. And as far as twisties go, that's what I have my other toy for this is just a beach toy. But if you want to go play on the twisties I will bring this instead.

Click to expand...

Turn the wheel the other way to get it closer to that pinch lol.

dude1116 said:

Turn the wheel the other way to get it closer to that pinch lol.

Click to expand...

That is legitimately as close as I can get it to the pinch weld.

Artimus said:

Sweet looking Jeeps! I'm a newbie to this so I have some questions, what years are those KJ's?

when you stated "did some magic on it", did you lift the Silver KJ?
What are the lifts on each of those?

and do they both have the ARB front bumper?



thanks!

Click to expand...

Artimus Johns silver one is an 03 and we installed if I rememebr right a 3.5 inch or so is where it ended up at with 245-75-16s. Yes it has an ARB, had it on mine for years and now he has it . Mine is an 04 that I bought new, has over 220,000 miles, was my DD until a few months ago when I picked up a low mileage 03 to build. Mine has the JBA coilovers set a little above 4 inches .
I also installed the JBA coilovers on my 03 but at 2.5 inches, shown nose to nose both with worn out 265-75-16s for photographic purposes only LOL