Taking it in for 4.10 gears

Hey guys
Taking the liberty in on Monday for 4.10 gears and front axle shafts. I am taking all my own parts. (napa reman cv shafts. And 4.10 gear sets)

My question is. Is there anything specific I should look or ask for to make sure they do the job right? Photos of the gear pattern maybe?

lockers

If you trust the shop then should be nothing, if you don't trust them, well would be too late even if you did have pictures

Now would be a good time to reasearch how to properly break in new gears.

Sent from my G870a on 38's.

Good point but they are used gears I got from a member on the site. I checked them over, look like they are in good shape

Master install kit?

Gyro

They are already broken in, but it never hurts to take it easy on them for a few hundred miles

If there's gear whine when you first start driving it - the setup is wrong and there's nothing that can be done to undo the whine.

If they're quiet when you first drive it then you're good to go :waytogo:

Bob

jeeptorino68 said:

Good point but they are used gears I got from a member on the site. I checked them over, look like they are in good shape

Click to expand...

Oh,...that changes everything
I never ran used gears sourced from someone else never trusted them

UPDATE, after reading on and seeing Bobs post, totally agree with him
Hopefully no whine

TwoBobsKJ said:

If there's gear whine when you first start driving it - the setup is wrong and there's nothing that can be done to undo the whine.

If they're quiet when you first drive it then you're good to go :waytogo:

Bob

Click to expand...

And LUCKY!!!!!!!!!

bOB

im sure they will work great Bruce!
i have run used gears in my 69 bronco, no problems. knock on wood