Doing my own front shocks, Product question.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hedsic

Full Access Member
Joined
Apr 3, 2013
Messages
961
Reaction score
0
Location
Des Moines, Iowa
The link will not work for me. From my understanding you want to stay away from Monroe though. Most any shop will do it for you for pretty cheap. Or if you order everything from JBA you can request it come preassembled (There is an extra charge but it's pretty small)
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Easier?? Yes
Better ? Oh heck no!
Buy good springs and shocks and take them to a shop to have them compressed
good springs and shocks are not Monroes , stick with Bilstein shocks, OME, or Ironman , springs OME or Ironman
Wouldn't waste my time installing stock type suspension
 

mcdeaglesandwich

New Member
Joined
Nov 30, 2013
Messages
16
Reaction score
0
Location
central florida
I think for the time being my expense limits will be dictating my purchase more than longevity.

This info however is greatly appreciated. hopefully I wont mind doing them again in a year or two.
 

twack

Full Access Member
Joined
Mar 3, 2009
Messages
1,131
Reaction score
5
Location
rochester mn
go to autozone and borrow their spring compressor, you got to pay a deposit but you get every cent back when you return it
 

Hedsic

Full Access Member
Joined
Apr 3, 2013
Messages
961
Reaction score
0
Location
Des Moines, Iowa
I think for the time being my expense limits will be dictating my purchase more than longevity.

This info however is greatly appreciated. hopefully I wont mind doing them again in a year or two.

If expense dicatates using a product that is inferior to even factory parts than it'd be best not to do it at all.

Of course, if the posts on the facebook page "It's a KJ thing" has already proven. That's not a shared opinion by many so what do I know.
 

TheBlueKJ

Full Access Member
Joined
Oct 29, 2012
Messages
1,617
Reaction score
9
Location
South Jersey
If expense dicatates using a product that is inferior to even factory parts than it'd be best not to do it at all.

Of course, if the posts on the facebook page "It's a KJ thing" has already proven. That's not a shared opinion by many so what do I know.

Yea most of them are kids and prefer to do things in a half assed hack job sort of way :superhack:
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
39
Location
Somewhere between being sane and insane!
If just wanting replacement without the hassle and plan on leaving/wanting it stock height the Monroe "quick strut" assemblies(actually coilovers) will be just fine and much easier to replace yourself.Don't forget the matching rear shocks(rear coils last longer,sag less).You will be good to go for another 50k.

Normally I wouldn't recommend Monroe but if you just want stock replacements that are easy to install you can't beat them.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
If expense dicatates using a product that is inferior to even factory parts than it'd be best not to do it at all.

Of course, if the posts on the facebook page "It's a KJ thing" has already proven. That's not a shared opinion by many so what do I know.

That site is like watching 25 cars skidding down the road on ice. You know there's going to be a big crash somewhere along the way, you don't want to see it, YET you can't look away.
 

AVR2

Full Access Member
Joined
Jan 17, 2009
Messages
146
Reaction score
0
Location
UAE
go to autozone and borrow their spring compressor, you got to pay a deposit but you get every cent back when you return it
After watching Eric the Car Guy's video on what happens when a typical parts-store spring compressor fails, I'd be nervous about doing the job myself. It's worth noting that the FSM for the KJ specifically states that you should use a professional wall-mounted spring compressor (about $700-worth) to do the job.

I'm sure that people change KJ struts with garden-variety spring compressors all the time, but I don't think I'd want to take the risk. And I've also never heard of people dissing Monroe struts as a replacement for stock before now.
 

Sdavis82

New Member
Joined
Aug 11, 2013
Messages
17
Reaction score
0
Location
Rockford, il
After watching Eric the Car Guy's video on what happens when a typical parts-store spring compressor fails, I'd be nervous about doing the job myself. It's worth noting that the FSM for the KJ specifically states that you should use a professional wall-mounted spring compressor (about $700-worth) to do the job.

I'm sure that people change KJ struts with garden-variety spring compressors all the time, but I don't think I'd want to take the risk. And I've also never heard of people dissing Monroe struts as a replacement for stock before now.

I also have never heard monroe dissed as stock replacement. Some of us are not looking to half ass it but also are not looking for a lift. What parts do you suggest then? Assuming someone is half assing it because they dont want a lift but do want replacement parts is a little short sided, imo.

Sent from my SM-T217S using Tapatalk 4
 

TheBlueKJ

Full Access Member
Joined
Oct 29, 2012
Messages
1,617
Reaction score
9
Location
South Jersey
I also have never heard monroe dissed as stock replacement. Some of us are not looking to half ass it but also are not looking for a lift. What parts do you suggest then? Assuming someone is half assing it because they dont want a lift but do want replacement parts is a little short sided, imo.

Sent from my SM-T217S using Tapatalk 4

Wasn't talking about you guys, if you saw the page we were talking about you'd understand. IMO Monroe is a fine stock replacement if you don't want to break the bank and keep a stock ride.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
WOW some are getting way off course
but back on course
Most Monroes are "OK" as a replacement since they are no better than what stock is/was. Have to understand that most everyone that is into doing anything at all to their vehicles "UPGRADES" any parts they install. So with that in mind most will at least do Bilstein etc
As far as spring compressors go, a buddy of mine had half his head really messed up years ago, lived as a vegetable for about 10 years, not knowing who he was, had to be fed, bathed etc So for me you can have all of those cheap *utozone etc spring compressors

If you don't want a lift, but want a better ride, better handling etc go with the OME 925 front coils, 948 rear coils, and OME shocks WAY better ride than stock and will last longer than you'll own the KJ I'm sure
 
Last edited:

ridenby

Gold Supporter
Joined
Apr 19, 2009
Messages
4,276
Reaction score
3
Location
Kentucky
Well worth paying someone to do springs if you are going to swap/change them. The monroes are a good choice to just R/R stock.
 

AVR2

Full Access Member
Joined
Jan 17, 2009
Messages
146
Reaction score
0
Location
UAE
OK, you've got me interested in the OME coils and shocks, I like the idea of better ride quality with just a tiny bit of lift. Do you use standard Mopar isolators and upper mounts with them, or do you need to upgrade those as well?
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
OK, you've got me interested in the OME coils and shocks, I like the idea of better ride quality with just a tiny bit of lift. Do you use standard Mopar isolators and upper mounts with them, or do you need to upgrade those as well?

Can just use the stock mounts and isolators with no issues. What I have done before is buy new ones though and then have everything put together before the install .
 

AVR2

Full Access Member
Joined
Jan 17, 2009
Messages
146
Reaction score
0
Location
UAE
I've just priced up OME struts and coils all round, plus new Mopar isolators and mounts. It's quite a lot more than I can justify, given that Monroe quick struts are so cheap. Oh well :(
 

Glen_S

Full Access Member
Joined
Jul 2, 2009
Messages
47
Reaction score
0
Location
Alberta
I just found this thread, was searching on how to change front shocks on my 04 KJ and ended up here.

Assuming one gets the Monroe kit mentioned in the OP - is this a fairly easy install? I also am just interested in replacing stock, don't want or need any lift etc..

thanks
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
I just found this thread, was searching on how to change front shocks on my 04 KJ and ended up here.

Assuming one gets the Monroe kit mentioned in the OP - is this a fairly easy install? I also am just interested in replacing stock, don't want or need any lift etc..

thanks

And there again we have the misconception that if you upgrade the suspension you lift it. Stock parts including Monroes are good for 50-60,000 miles at most. This includes springs and shocks. Now some will try and argue that they have driven 100,000 on the stock springs/shocks, which maybe true but the suspension was shot long ago.
Upgrading to say OME 925s/ OME shocks in the front will give you a much better ride and handling than it ever was stock. I switched my stock out at 20,000 miles and waited too long in my book. Over railroad tracks you had to slow down due to hitting the bumpstops, afterwards it was so much better .
So if you are looking at redoing your suspension I would suggest looking at the 925/947 springs and OME shocks, it will put you back up to stock height, 100 times better ride and handling and last way longer than stock crap / Monroes lower end stuff ever will
 

Latest posts

Members online

Top