What did you do to your jeep today?
- Thread starter TheQ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ThunderbirdJunkie
Bronze Supporter
How 'bout that little MG?
oops, that's not a Midget...
oops, that's not a Midget...
Last edited:
CobraNutt
Full Access Member
Well, after a final POP on Saturday from my front driveline and the beginning of a nice wobble, along with loss of drive to the front wheels,
I decided I had better get under there and take care of it. Yeah, the CV joint is toast. The pop I heard was probably the final ball shooting out
the front of the joint, as the shaft was just spinning freely inside the housing.
I didn't even have to pull the housing apart to get it off! Doh!
All better now! Nice to have my 4WD back !!
I decided I had better get under there and take care of it. Yeah, the CV joint is toast. The pop I heard was probably the final ball shooting out
the front of the joint, as the shaft was just spinning freely inside the housing.
You must be registered for see images attach
I didn't even have to pull the housing apart to get it off! Doh!
You must be registered for see images attach
All better now! Nice to have my 4WD back !!
WOW that had to be making noise for some time now
CobraNutt
Full Access Member
Surprisingly, no. It was silent until Saturday! It's been running dry for a long time though! I consider myself pretty lucky it didn't come apart before now! I haven't used the 4WD for awhile though, so no stress on the joint...but still...
Holy crap! :icon_eek:
Mine (I think) is making some noise and needs to be replaced on the next nice day. Fortunately, I have the new joint here already.
I cleaned off 3" of slush this evening, then inflated all the tires from 29 psi to 35 psi. Nope, haven't checked it in the last 2 months (oops).
Mine (I think) is making some noise and needs to be replaced on the next nice day. Fortunately, I have the new joint here already.
I cleaned off 3" of slush this evening, then inflated all the tires from 29 psi to 35 psi. Nope, haven't checked it in the last 2 months (oops).
TheBlueKJ
Full Access Member
My neighbor actually built one of those from the ground up:headbang:
Still turns all of the time no matter what so always going, just not as much pressure
Last Sunday Wildman brought his XJ over to mount a winch, wire up some LED back up lights and install new transfer case linkage
Heres his new 12,000 lb winch on the XJ with 4 inches of lift and 33s
Had to sneak at least the front fender of mine in there:headbang:
Heres his new 12,000 lb winch on the XJ with 4 inches of lift and 33s
You must be registered for see images attach
You must be registered for see images attach
Had to sneak at least the front fender of mine in there:headbang:
You must be registered for see images attach
TheBlueKJ
Full Access Member
He needs to throw a little bit of paint under there!
:signs8::signs8::signs8::rotflmao:
Tire rotation, and finally got the rest of the Gorilla Nuts installed. :insane:
honu
Full Access Member
Flushed and refilled the cooling system, got all the gunk out... and while at it, replaced the cracked radiator, upper and lower hoses and the thermostat
teckman02
Full Access Member
got some new tires on the jeep this morning i was wanting some duratrac's but could not get a set in the time that i needed unless i wanted to pay almost 300 in shipping... i was going to get some cooper st maxx's but i would have only been able to get a set of two by tuesday and i am going on a road trip to gaylord Mi. first thing wednesday morning so i ended up getting a full set of goodyear silent armor's i hope that they work out for me.
martin_metal_88
Full Access Member
left him at the garage, I already miss my KJ but can't wait to get the new liftkit installed and finally drive a decent suspension 
At least, more decent than a end of life OEM.
At least, more decent than a end of life OEM.
Snail Farmer
Full Access Member
Keep us posted but I'm sure you'll be happy with them. :cheers:
crazyjeepkid
Full Access Member
hearing groaning sounds from the front everytime i hit a bump or use brakes. if anybody has a clue on what the issue is, please post on this thread
http://www.jeepkj.com/forum/f196/jeep-liberty-groaning-problem-55096/
http://www.jeepkj.com/forum/f196/jeep-liberty-groaning-problem-55096/
TwoBobs Black KJ was here couple of weeks ago
Now another Black KJ is coming tomorrow for JBA UCAs, LBJs, rear tri link, diff fluid swap, and not sure what else he has on the list by now
Then Merry Christmas for mine, Saturday 4 parts should be here for her
Also before a Christmas trip I still need to replace a right side CV as well, Had one in there that Al ( original owner of jeepinbyal ) had rebuilt about eight years ago, the boot let go. :icon_sad:
Now another Black KJ is coming tomorrow for JBA UCAs, LBJs, rear tri link, diff fluid swap, and not sure what else he has on the list by now
Then Merry Christmas for mine, Saturday 4 parts should be here for her
Also before a Christmas trip I still need to replace a right side CV as well, Had one in there that Al ( original owner of jeepinbyal ) had rebuilt about eight years ago, the boot let go. :icon_sad:
CzarKJ
Full Access Member
Shocked a few coworkers on the way to a group outing. Then I located a new tailgate! Will need to be painted though.
Sent from my iPhone using Peanut Butter
Sent from my iPhone using Peanut Butter
Similar threads
