What fittings will I need?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ry' N Jen

Banned
Joined
Dec 26, 2006
Messages
9,242
Reaction score
12
Location
Slightly North of the 49° th. Parallel... In HongC
To instal an '02 type radiator with the inernal transmission cooler?
Can I just use a tubing cutter on the existing ****** cooler lines and some new fittings to plumb the ****** cooling lines into the new rad?

I also want to plumb in an auxiliary ****** cooler while I am at it!
I am thinking of a dual circuit cooler so I can also add a power steering cooler.
Seeing that the factory unit bought the farm a while ago!

We would really like to be able to just drive without having to stop every half an hour to let the ****** cool down!
 

ridenby

Gold Supporter
Joined
Apr 19, 2009
Messages
4,276
Reaction score
3
Location
Kentucky
Thinking just some fittings at the rad. to get couple inches of hard line out to slide a rubber line over,hose clamps and walla.
 

kskj

Full Access Member
Joined
Sep 18, 2009
Messages
136
Reaction score
0
Location
Valley Center, Ks
I used a tubing flaring tool when i did mine. But i was told there is not much pressure on the transmission lines.
 

Latest posts

Members online

Top