how to make intake sound louder.

Jake.Ski said:

well i posted my pics of my complete CAI and i like it a lot! little bit more responsive, plus the sound!! only problem now is scared of playing in the water....

Click to expand...

just put a valve in the intake incase of sucking in SMALL bits of water

tommudd said:

K&Ns =no good on the KJ
tried one for 25,000 miles
and swapped it out for Amsoil in the stock box with 4 inch hose from the grill to the box, better mileage / runs smoother
just say no to those hot air suckers

Click to expand...

Amsoil filters are better but having it in the grill is like having a straw

sent from my EVO 3D

I have the black K&N filter. Makes the engine sound deeper and more throaty. Also has quiet whistle. It is very loud when first started and when the hood is up. I wouldnt worry about sucking in water unless you like to drive in lakes. I have driven in water up to the bumper and had no problems. Plus it made my gas milage go up 3mpgs.

was looking at the ones on ebay.. anyone think the "dual intake" ones would give any extra performance?
http://cgi.ebay.com/ebaymotors/DUAL...s=Make:Jeep|Model:Liberty&hash=item43a9702b3a

or just grab these?

cheapest
http://cgi.ebay.com/ebaymotors/2002...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

better
http://cgi.ebay.com/ebaymotors/02-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories[/QUOTE]

Ron, I do not believe the y-pipe intake provides any benefit to a traditional intake (either the stock box or a single tube design). If you really like the looks of it I don't see the harm since iirc, the KJ doesn't have a MAF sensor in the intake.

you should try to box it off, otherwise you're pulling in hot air from the engine bay. which is actually hurting you

ronj75 said:

was looking at the ones on ebay.. anyone think the "dual intake" ones would give any extra performance?
http://cgi.ebay.com/ebaymotors/DUAL-02-10-JEEP-LIBERTY-3-7-3-7L-V6-TWIN-AIR-INTAKE-KIT-/290605509434?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AJeep|Model%3ALiberty&hash=item43a9702b3a

or just grab these?

cheapest
http://cgi.ebay.com/ebaymotors/2002...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

better
http://cgi.ebay.com/ebaymotors/02-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Click to expand...

[/QUOTE]
NO performance gains from the Y piping, will just suck in more hot air which is not what you want
The computer will allow only so much and the stock set up provides plenty
Only thing you get with the CAI intake is more hot air and noise

Yeah...
But he's after "more noise" Tom!

I know
but thats about like putting a pair of socks down the front of your pants before a first date
when it comes time its not going to do ya much good :happy175:

Run PVC pipe from your throttle body to under the drivers seat. That should give you the desired effect. Oh, dont forget to put a tooth brush in it for a filter.
Oh and I forgot, try not to fart too much or it will take away a few MPGs

theroofable said:

Run PVC pipe from your throttle body to under the drivers seat. That should give you the desired effect. Oh, dont forget to put a tooth brush in it for a filter.
Oh and I forgot, try not to fart too much or it will take away a few MPGs

Click to expand...

X2

IMO, get the Y pipe, put some elbows on it , cut some ovals in the hood and mount the air filters so they stick up through the hood

or enclose the filters in resonator boxing and tube it up through the hood with 2 snorkel tophats.....

:whip:

if you want cold air, get cold air but you aren't going to find it under the hood

yep get one of those Y Pipe jobbers
they are well

i like my air coming right off the manifold

like i said, anyone wants to cut two holes in their hood I got about 20' of 8" stainless ill cut for ya lol...

Well since I already have two holes in my hood..................:happy175:

up and out then i'm sure you can either make or find cheaply some snork tophats

or if ya ask real nicely I'll build you some cowl scoops

By the way that "was" Wildman Larrys setup !

Whats with the "Cement Slurry"

lemme guess the hood was up to wash off/out the engine, replace the tensioner, alternator and elec fan?

He found a mud hole the ATVs had been using to play in and had to see how fast he could go through for "photo" purposes
This was at the end of the day he finally checked it, and wash/replace nah he just drove it home that way :shrug:

lol, still looks like slurry to me

mud here is either red.. or black lol

JeepinJarhead03 said:

lol, still looks like slurry to me

mud here is either red.. or black lol

Click to expand...

Thats good old Kentucky mud!!
But I agree with you it does look like slurry!:happy175: