Door panel plastic clips/fastners

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mklee176

New Member
Joined
Mar 1, 2011
Messages
11
Reaction score
0
Location
Burbank, CA
Hi everyone!
First time poster, long time reader.
I have a question for my fellow Liberty owners, hope it won't come off too silly.
I have a 2007 Jeep Liberty Sport 4x4 (fully stock, no modifications), and I have recently had the driver side window regulator replaced (for the 3rd time) on the driver side door. After the auto repair place finished the job, I realize they didn't not fully attached the door panel to the door. So, I simply pushed around the panels until I hear a click that tells me the plastic clips/fastners are now pushed in. However, perhaps a moment of eagerness, I pushed too hard, and one of the clip/fastner was not lined-up and got broken in half.

So, my question is this. It is necessary for me to replace that one clip/fastner, or are the other 9 enough to secure the panel in place. If I HAVE TO replace the clip, it is hard to take the panel apart without going to my local repair shop and pay them to do it?

Any advise will be greatly appreciated.

Thanks!
 

blacKJ

New Member
Joined
Nov 8, 2009
Messages
21
Reaction score
1
Location
Tallahassee
It'll be fine without it, you may hear some rattling of the panel against your door at idle or while driving at certain instances. But if you'd like to have your mind at complete ease and replace it they sell manufacturer fasteners at auto parts stores and lowes/home depot..
 

Latest posts

Members online

No members online now.
Top