luigi1285
New Member
any one have any feedback on the tera flex by jba? was thinken bout doin it. i want somethin thats simple enough to take off in a pinch incase of warrenty issues. thanks
TeraFlex KK Budget Boost
- Thread starter luigi1285
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Diggerfreek
Moderator
The teraflex and daystar lifts are basically the same.
As far as R&I goes, you would have to remove the coil over from the KK and have spring compressors to D&A the coil over...
As far as R&I goes, you would have to remove the coil over from the KK and have spring compressors to D&A the coil over...
luigi1285
New Member
as far light wheeling the lift performs well?
Diggerfreek
Moderator
It will serve you just fine. You will hear it creak in the future, but there are a ton of spacer lifts out there on KJ's.
Atrus
Full Access Member
If you want something easily removable -
3/8" Boiler top plate (I think they are supposed to work on KK's) + 3 ring clevis (I assume this works on KK's too)
And then extra upper isolators in the rear. <$100 for it all, and will net you 1" lift in the back and about 1.5" up front.
Best part is no disassembly of the coilover and should ride just like stock.
3/8" Boiler top plate (I think they are supposed to work on KK's) + 3 ring clevis (I assume this works on KK's too)
And then extra upper isolators in the rear. <$100 for it all, and will net you 1" lift in the back and about 1.5" up front.
Best part is no disassembly of the coilover and should ride just like stock.
