WWDiesel's latest activity
-
Left of the brake pedal. -
WWDiesel replied to the thread CJC Transmission pan.I added the deep sump PML transmission oil pan a few years ago. It made a big difference in lowering and keeping transmission fluid...
-
-
I have a 42RLE PML aluminum machined transmission pan installed with a Lube Locker Gasket. No more leaks again. Has a drain plug &...
-
WWDiesel replied to the thread problem solved idler tensioner crd.IF you send your worn out fan hub to me, I can bore the housing for rebuild and fitment using the oversize Koyo deep groove ball...
-
-
WWDiesel replied to the thread CRD Technical questions about my new KJ.Flow Control Valve. It creates a low pressure zone to allow exhaust gas to be sucked into the intake for the EGR system. All the EGR...
-
-
Yep! Definitely doesn’t get to that temp. Looks like it’s definitely failed. It’s a diesel & 2007!
-
WWDiesel reacted to KJowner's post in the thread 2005 jeep liberty limited diesel interchangeable front end parts? Will a dodge magnum 2006 or a 2003 Dodge ram 1500. Front end parts interchange with
Like.
Frustrating, Moog problem solver parts are supposed to be stronger than standard and JBA make an uprated upper control arm. -
The cam position sensor will cause no start, and since you are getting a code I would suspect that. Is the new one you put in genuine...
-
WWDiesel replied to the thread CRD Technical questions about my new KJ.If the thermostat has failed causing the engine to run too cold all the time, it will greatly increase fuel consumption. The gauge...
-
-
High fuel consumption could be dragging brakes, worn injectors and start-stop driving too, I don't think the torque converter locks up...
-
WWDiesel replied to the thread Thermostat normal or no?.What year model, and is it a diesel? If a diesel, it should look like the picture when at normal temperature. If it is running at 1/4...
-
