-
-
SI really think the spacers are the issue here. Dang things should be banned.
-
SDrive for a ways 25-30 minutes then pull in and right away put your hand very near each ujoint if warm/hot then there is the issue...
-
SYep it was the u-joint. Rusted, smooth like butter now.
-
SPicture where the clevis attaches to the lower control arm - it isn't at the end of the LCA at the lower ball joint. If it attached...
-
SFatty IMO , which means nothing to anyone else, MOABs just look right on a KJ
-
SShive reacted to mercdudecbr600's post in the thread Lifting in 2022 --- things have changed with
Like.
Ha! I’ve got a Tdi that I adore and went onto vortec forum and got blasted with brotasticness - I bailed immediately. -
SRun a wire , well attach it to the positive side of horn, and touch to battery, if it blows then you've ruled out the horn being bad...
-
Shttp://www.colorado4wheel.com/manuals/Jeep/KJ/
-
SShive reacted to tommudd's post in the thread Ironman 4x4 Kit for $525 - starting a build with Like.
Of course not while they can appear to be the same length/height overall it is the spring rating that makes the difference and provides...
-
SRemove it take it all apart sand well, every joint , every place that you see brown stains etc Repaint every part its simply water...
-
SIf going all OME 2927 front springs ( the two in front just means there are 2 springs in the box ) 9009 front shocks 2948 rear...
-
SShive reacted to Christine_S's post in the thread How to hack JK foglights to work in a KJ with Like.
Well, I started the job but my husband finished it. So, the pictures became my contribution as it was coming together! But, I know how...
-
-
Loading…
-
Loading…
