lfhoward's latest activity
-
I meant to say the rubber *is* harder-wearing. This is what the Nokians have for plies -
lfhoward reacted to KJowner's post in the thread Rusted rear frame trailing arm lower control arm repair with
Like.
Needs a lot of steel welding back in to put the strength back in the shell, I wouldn't fancy riding round in that on or off road, crash... -
I think they seized up the engine. More to follow.
-
lfhoward replied to the thread Bert is in my driveway...won't start....Check for a broken ignition cylinder pin.
-
lfhoward replied to the thread 4.10 gear finally Installed.I am running BFG KO3’s so heavy like Duratracs.
-
lfhoward replied to the thread 4.10 gear finally Installed.Good to know. That size is 30.5 inches tall, same as my 245/75r16’s. I round up and call them “31’s.” That means I could expect similar...
-
245/70r17
-
lfhoward reacted to duderz7's post in the thread Front Lower control arm and steering knuckle modification with Like.
2005 is KJ. KK started in 2008
-
Changed out my leaking water pump on my 05 renegade. Once I got the clutch fan off, it slipped and punched a hole in the radiator. Then...
-
lfhoward reacted to Johnny O's post in the thread Bert is in my driveway...won't start... with Like.
Dang kids never listen. I told them Bert (2007 KJ 3.7L) was old and tired and deserved to be taken care of and only used around town...
-
lfhoward replied to the thread Front Lower control arm and steering knuckle modification.Jeep changed the design in 2008 for the KK Liberty. It's just the way you think it should be. Unfortunately I don't think KK knuckles...
-
So a little update, I almost filled up (used points so not completely), and have some mileage number. Typical tank (fill to gas light)...
-
lfhoward replied to the thread 4.10 gear finally Installed.I know you have 4.10 gears, but what size tires do you have?
-
The saga continues. Had it towed to a shop. Apparently Napa Canada calipers do not fit correctly on the mounting brackets, sloppy fit...
-
Mine did that, I stripped the caliper and rebuilt it with a new piston and seals, 10x more work than just buying a new one!
Staff online
-
HoosierJeeperGold Supporter/Admin