lfhoward's latest activity
-
I did mine myself.I have a thread on here somewhere. It's quite a project. I feel the most important thing is to have plenty of time and... -
Yeah buying it ahead of time, making sure its set up properly and slapping it in, is just easier. The front was always going to be set...
-
BTW if you just briefly hit the low pressure Schrader valve you'll be able to tell if any freon is in there.
-
I am no professional! However I replaced a failing compressor on the wife's minivan a few years back. It was starting to growl and I...
-
lfhoward replied to the thread 4.10 gear finally Installed.That’s awesome. Nice work. It sounds like a great idea to have a spare front differential, regear it on the bench, and then swap it in...
-
Did it myself, I got close, I didn't have extra pinion bearings on hand to make a set up bearings. I had assumed we had the pinion depth...
-
I’ve got no AC in my 2008 with 229,000 miles. The compressor was replaced a couple of years ago. Other than that it has been trouble...
-
lfhoward replied to the thread 4.10 gear finally Installed.Did you do the regearing yourself? How much of a process was it? Were the new ring and pinion set up on the first try, third try, or...
-
Finally got around to installing my 4.10 gears in the rear. Couple reasons for this. Upgraded to some larger tires a few months back...
-
lfhoward reacted to WesStevens's post in the thread Can you mount factory skid plates on a Liberty that didn't come with them? with
Like.
Just a quick update on this and for those interested in doing this project… I did find a tool on Amazon as well as the correct size... -
lfhoward replied to the thread 3.7 engine swap into a Jeep Patriot.The Patriot is a transverse front wheel drive setup, whereas the Liberty is traditional rear wheel drive. Those are pretty different.
-
lfhoward replied to the thread Right rear shock making a strange noise.Check the torque on the sway bar links as well. Maybe the shop disconnected them while installing the shocks?
-
Getting my 2005 road ready again.
-
you can look up your vin here and it will give you the "package" listing/ build sheet at the bottom of what all it came with...
-
Carrying on with the stripping of my parts Jeep. The strength difference between an 8.25 and a 30a is quite obvious when you look at them!
