KJowner's latest activity
-
KJowner reacted to Jhkj04's post in the thread Rusted rear frame trailing arm lower control arm repair with
Like.
All fixed, could not find weld on units. Cleaned them up and started welding. Not pretty but stronger than the stock brackets. -
KJowner replied to the thread Six speed Manual Trans fluid exchange time/mileage schedule.I wouldn't stress too much, long term get a new plug and weld a nut onto the old one (or get a garage to do it) so it can be removed.
-
KJowner replied to the thread What did you do to your jeep today?.Check your upper and lower ball joints, they are the no1 cause of knocking noises & if ignored the wheel will fall off!!
-
For future reference, you do not necessarily have to buy the more expensive Mopar branded ATF+4 since ANY brand ATF+4 is actually...
-
Arrived: - PML finned, aluminum, deep transmission pan with new stainless steel hardware - Mopar ATF+4, 8 quarts - Mopar transmission...
-
KJowner reacted to Gyro's post in the thread My rear springs on the 2002 kj keep popping off when I'm fully flexed out. I'll post pics below. What can I do to fix this issue . Thanks everyone. with Like.
Looking at the RC site you appear to have the wrong shocks. You need the 2in lift ones. The ones you have are over extending. The brake...
-
To revisit, I ended up having 2 problems. 1-My compressor did die and I lost AC and 2-the darn AC button on the heat and cooling...
-
KJowner replied to the thread Lift faq: Read before asking questions!.I'd guess the shocks are too long, that's all there is to limit downward travel on the axle. They look like they would be better on a...
-
Got my new tires on the JLU - went with the Nitto Recon Grapplers. Wanted a lightweight tire (these only weigh 52 lbs each for a 35"...
-
KJowner reacted to cjw3cma's post in the thread Convert the factory cigarette lighter / power outlet on the dash to be keyed ON and OFF. with Like.
Made one for my own use and it works perfectly. Without the key being inserted the lighter / outlet is OFF - thus any item plugged in...
-
I talked to a transmission shop manager today (he got me a torque convertor for a 67 Dodge RT 440 restoration), and he thinks its most...
-
KJowner replied to the thread Rear suspension or axle clunk when getting on or off the gas..+1 for KYB
-
KJowner reacted to atikovi's post in the thread Rear suspension or axle clunk when getting on or off the gas. with Like.
Problem found and fixed. I had the truck up on jack stands and pry barring every suspension part I could reach but didn't see any play...
-
KJowner replied to the thread Transmission leak.Have you asked why can't they just replace the pump or its seal? I'd get a second opinion, it sounds very expensive replacing a whole...
-
KJowner replied to the thread Looking for a steel back bumper set up.Looks like a custom one from long ago, there's enough detail in the picture to mock one up from cardboard and wood, it's easier and...
