Recent content by Jbergun

See if the conpressor is locking up at all. Do a pressure test on the refrigeration. Likely has a leak.

Washed with Chemical guys mr. pink Quick wax with Aero Cosmetics Wash Wax All Buffed headlight with Miguiars Scratch X 2.0 and a cheap amazon foam buffer that attaches to a drill. This is my first time using this stuff. I am not too impressed with the Mr. Pink its car wash think zip wax is...

Could probably fit atleast 4 of these. Very easy to install just used a 3/4 step bit. Lights up and stays pressed in while on. Pops out flush and light turns off when off. Come in many different colors. Could make it very easy to know what is on without really looking.

My trans bolted right on once i get it on the dowels. The transfer case gave me a hell of a time. I agree with your buddy torque converter should be done once trans is in. Try getting a jack towards the back of it to change the angle a bit. If you have all other bolts torqued loosen them up a...

I got out and measured 21” up front and 21.5” in the rear. Might be a little higher as this was parked on the street and my street happens to have a pretty heavy pitch.

The funny thing is just this year i became allergic to pineapples. So to find a chiquita pineapple sticker under the guard was kinda ironic. I lived 27yrs loving them literally my favorite fruit.

Finished up the wiring and mounted my switch in its forever home. I have the switch wired to have a halo when on and no light when off looks really bright just the camera glare i guess. upload pic

Finished up the wiring and mounted my switch in its forever home. I have the switch wired to have a halo when on and no light when off looks really bright just the camera glare i guess. upload pic

I actually dont have any extras no top plate no clevis nothing. Looks tall cause i am still on stock size tires. But thank you for the compliment. I havnt taken any measurements since i first did the lift i was 3” to 3-1/4” over where i was. I can do some measuring later today.

Got some leds from ebay. Yotamotor is the brand advertised as 7”. That dimension is the overall width. Got them in a flood style. I still need to clean up the wiring. To install them i removed the brushguard and drilled it mounted the lights extended the wires. With the lights on the guard i...

Removed the mopar brushguard to mount up some ebay special led pods. Got them mounted wired and working just have to adjust the angle and clean up the wiring in the cabin.

I wouldnt be excited to cut into that loom. The dimmer wire also goes to the radio to allow the factory radio to be adjusted with dash lights. I would start there and follow it back. Dimmer wire might jot work i assume it has varied voltage. Any pics of the lights?

I was only able to have it on the street. Emissions testing was due at the end of this month to get city sticker and plate sticker. If i had the space i would have parted it out.

Sold for $500 that sucked

I have seen those light bars on everything from mini vans to altimas drivint on public roads with them on. Everyone here is either driving with their brights on or have some dumb as headlight mod that blinds people anyways. Cops dont do anything in the city anymore.