Recent content by bttlshp

This diagram shows a coolant temp sensor (item 3), which leads me to believe that there is coolant somewhere in there. Manifolds, Intake and Exhaust, 3.7L [EKG]. Fits: 2002 JEEP LIBERTY | FACTORY CHRYSLER PARTS

This diagram shows a coolant temp sensor (item 3), which leads me to believe that there is coolant somewhere in there. Manifolds, Intake and Exhaust, 3.7L [EKG]. Fits: 2002 JEEP LIBERTY | FACTORY CHRYSLER PARTS

The radiator has been changed and I have checked for visible leaks.

There is steady, although faint steam from the exhaust when everything is up to temp, so it's getting into the combustion chamber.

My wife's 170K mile 3.7l KJ Liberty is leaking coolant and there is steady, although faint steam from exhaust. I pulled the plugs and there was one that looked steam cleaned (coolant in combustion chamber), but the compression check was consistent across all cylinders. If it were a head/head...

My wife's 170K mile 3.7l is leaking coolant, and I'm trying to track down the source. There's steam from the exhaust, but the oil is clean. I ran a compression test last night to see if one of the cylinders wouldn't hold pressure, but the results weren't as conclusive as I'd like. There was...

Finished the job today. I had to loosen the upper clamp on the down pipe to wiggle it out of the way. I only needed 1/4" or so. I had put some DB blaster on the rusty old exhaust flange bolts the night before, so everything came apart alright. The starter came out with the solenoid at 12...

Hello- I'm stuck in the middle of replacing what I'm 90% sure is my bad starer on my '02 3.7L Liberty. Right now, the starter is totally loose and disconnected, and I just can't get it out. I've read that you're supposed to remove the transmission to bellhouse brace. Is this part #2 in the...