Recent content by atikovi

  1. A

    Rear suspension or axle clunk when getting on or off the gas.

    Problem found and fixed. I had the truck up on jack stands and pry barring every suspension part I could reach but didn't see any play. Even jacked up the rear end to ride height and still nothing. Lowered it to the ground and rocking a tire a little, made the clunking sound. Crawled underneath...
  2. A

    Rear suspension or axle clunk when getting on or off the gas.

    Ok, after 9 years it may have changed. Were they made in the USA then?
  3. A

    Rear suspension or axle clunk when getting on or off the gas.

    That's odd. At the Moog site it says 2 in a box, https://www.moog-suspension-parts.com/moog-k200428 and $13 at Rock. Question:Does part number moog-k200428 come in pairs or singles? Answer:Part number Moog-k200428 comes with a quantity of 2 bushings per box. Question:K200428-Control Arm...
  4. A

    Rear suspension or axle clunk when getting on or off the gas.

    And they come two in a box? I don't know if the control arm is OEM and if the aftermarket bushings will fit aftermarket arms.
  5. A

    Rear suspension or axle clunk when getting on or off the gas.

    Who sells the bushings? I don't see them on Rock Auto.
  6. A

    Rear suspension or axle clunk when getting on or off the gas.

    OK I'll take a closer look tomorrow.
  7. A

    Rear suspension or axle clunk when getting on or off the gas.

    New to me 2006 6-speed with 180,000 miles. Whenever I even lightly step on the accelerator or take my foot off it, I hear and feel a clunk from the back like some suspension bushing is loose, worn or missing. Even parked in the driveway I can look out the door when letting out the clutch and...
  8. A

    Suggestions for A/C clutch?

    Couldn't find an original clutch out of the 5 Liberty's I saw, so I grabbed this UAC Korea compressor that looks to have been installed in the last year or so. It's blowing ice cold for now.
  9. A

    Suggestions for A/C clutch?

    Are you sure you didn't install a clutch from an aftermarket compressor onto your original compressor? They may bolt on but may not fit perfectly.
  10. A

    Are these Liberty's pre-wired for fog lights?

    Specifically my 2006 Sport. My grille is cracked and I see a nice chrome one in the junkyard with fog lights. Thought I'd get them too while I was there. I assume I would need the headlight switch as well. Anything else?
  11. A

    Suggestions for A/C clutch?

    How so?
  12. A

    Suggestions for A/C clutch?

    Sure it is. Just took the old one off in 15 minutes.
  13. A

    What parts do I need to add factory cruise control?

    Don't think they would be anywhere as cheap as getting the parts from a junkyard.
  14. A

    What parts do I need to add factory cruise control?

    Want to add cruise to my 2006 Liberty from junkyard parts. I put together what looks like the needed parts. Let me know if I'm missing anything or if there is an install video somewhere. Right and left cruise controls switches Switch wiring harness in steering wheel Servo unit with bracket...
  15. A

    Suggestions for A/C clutch?

    Just bought the truck and it was making an awful noise, like maybe a bad throwout bearing. After getting it home, I find it's the A/C clutch. I can move it around by hand like the bearing is shot. Is there a name brand replacement? I see some Chinese ones on Ebay and Amazon for around $40 but...
See more

Random media

IMG 20130309 121939 546
Painted OME Struts
Removed the plastic trim on the seat to fit the covers. With the cover material behind the trim it gives it a much more finished look. Also made it
Εικόνα 0099
Photo111
detailed
83238E76-598B-4624-9B12-0CE1E414E365.jpeg
image need to paint and make mounts for tank strapes
OME Struts

Latest posts

Members online

Total: 250 (members: 3, guests: 247)
Top