2
24turbo
Latest activity Postings About
-
-
224turbo replied to the thread P0765 Shift Solenoid "B"question..The relearn should be done by the shop doing the work (with a scanner). I mentioned it just for your awareness. The procedure you...
-
224turbo replied to the thread Rear upper control arm wont go in all the way.If I understand what you are saying correctly, that is NOT the case. When you disconnect the upper ball joint at the differential you...
-
224turbo replied to the thread P0765 Shift Solenoid "B"question..If you have a 42RLE that is the correct solenoid pack. Just double check you dont have a 45RFE as I believe some early 03s came with...
-
224turbo replied to the thread 2003 Liberty w/ 165K miles 42RLE Questions..If you changed the solenoid pack you probably should do a quick learn regardless of having any issues. Having said that I cant say for...
-
224turbo replied to the thread Transmission Failure.If the level is fine, drop the pan and see whats in there. There is a small chance you filter is plugged and changing it will fix it...
-
224turbo replied to the thread Front differential crush washer/pinion nut torque 500 ft/lbs??.When I replace a seal I do it slightly different. I make a good quality scribe mark on the nut and yolk. When re-assembling I tighten...
-
224turbo replied to the thread Front differential crush washer/pinion nut torque 500 ft/lbs??.If the crush sleeve doesnt take much torque to crush I would be weary of it (not sure where you sourced it from). I cant see any reason...
-
224turbo replied to the thread Front differential crush washer/pinion nut torque 500 ft/lbs??.The procedure you posted makes no sense to me. Install the pinion as described in the procedure, but ignore the whole torque procedure...
-
224turbo replied to the thread 2003 KJ - fail of 4wd for a short time..I cant say for sure why your engagement is so slow, but my best guess is maybe your synchro is damaged or the spring is weak or broken...
-
224turbo replied to the thread Cranks hard to start.Hard starting when engine to temp can be an indication of a problem with your Evap system. If its especially bad right after fueling...
-
224turbo replied to the thread 2003 KJ - fail of 4wd for a short time..When you pull the transfer case lever it doesn't necessarily fully lock into 4wd immediately. There are synchronizers that need to mesh...
-
224turbo replied to the thread 2006 liberty limited automatic transmission failed.Unless Im missing your point are you asking for off the shelf/vs local transmission builder? You got a quote from a "local reputable...
-
224turbo replied to the thread Front LCA bushings replacement.As stated above use a sawzall with Torch blades. And use a TON of cutting oil. Its messy but the bolts cut much faster and you will...
-
-
Loading…
-
Loading…
