Search results

  1. C

    No start issue on Liberty crd

    The only times it starts is when it is cold. The flow plugs are 5v and it seems to have good cranking speed. It is just low on cranking fuel pressure.
  2. C

    No start issue on Liberty crd

    My Crd has been having a weird no start issue for a while where it would only sometimes start when cold. I’ve tested my fuel pressure which is 900 while cranking and 4k when running. I also checked injector leakoff and found a decent amount of it. Not sure if it’s causing or caused by low fuel...
  3. C

    No start issue CRD

    I believe it is rail pressure everything checks out on my low pressure side
  4. C

    No start issue CRD

    Not aware of a racor filter. I have a generic Napa one.
  5. C

    No start issue CRD

    Sort of, I use the lift pump to bleed instead of the plunger.
  6. C

    No start issue CRD

    I have a lift pump already installed as well as the updated filter head. Is there a way to tell if it’s coming from the primer and filter area?
  7. C

    No start issue CRD

    Hello, for the past month or so my 05 CRD has been giving me some grief when it comes to starting up. I am thinking it could be a fuel pressure issue but I am not sure. Here's the progression of the issue. 1. Taking a bit longer to start 2. Will coldstart but needs starting fluid to start a...
  8. C

    No start when at operating temp and p0299 (possibly unrelated)

    I’ve been tinkering with it a little and have noticed a quirk. It’ll coldstart and then once turned off, not start without starting fluid. It runs fine after this and if I turn it off again, it’ll start without starting fluid.
  9. C

    No start when at operating temp and p0299 (possibly unrelated)

    Thanks, do you also have any advice on tightening the nut to injector 4, I’ve only been able to get half a turn off because of the firewall. The stubby doesent have enough torque to tighten and the regular won’t fit on the way the nut is currently turned.
  10. C

    No start when at operating temp and p0299 (possibly unrelated)

    I’m assuming you’re talking about the line that run along the top of all the injectors. Also what are the tee lines that I should plug with screws.
  11. C

    No start when at operating temp and p0299 (possibly unrelated)

    Tried starting fluid and it not only started the car but it kept running too
  12. C

    No start when at operating temp and p0299 (possibly unrelated)

    I’ll try using something to start but I at the very least have pressure to the filter head
  13. C

    No start when at operating temp and p0299 (possibly unrelated)

    I will try to explain my situation as best as I can, i have a 05 CRD that will coldstart just fine but after it warms up and gets turned off it will crank and not start. 2 common recommendations were a lift pump (already in car) and a crank sensor which I installed and had no luck. Not sure if...
  14. C

    Transmission codes p0944 p0869 p0932

    Hi I have a 05 Crd with the codes listed above plus a p01684 and wheel sensor codes. Seems to drive fine but the codes always come back when I reset them. Anyone else had this problem?

Latest posts

Members online

Top