Search results

I've tried 3 times to do my badges but it won't stick on theses. I've done this on three other vehicles with no problems. Yours look great, can I ask your method? I can't get it to break clean on the edges.

So my 18,000 mile Libby uses lots of gas as I mentioned earlier, 13 MPG. It was owned by a little old lady who probably never drove over 40 MPH (my aunt) so I figured a new set of plugs wouldn't hurt. I bought the NGK V-Power OEM plugs and to my surprise I removed Bosch Iridium plugs. I took it...

Mine is an '04 Sport, 3.7L, auto. It only has 18,000 miles on it, sat most of its life. I'm only getting 13 MPG around town, haven't had it on the highway yet. I was thinking I should change the plugs and PCV valve, any other suggestions to increase MPG?

I don't think mine is drive-by-wire, I'm pretty sure it's cable operated, plus I didn't see an actuator in the engine compartment. I couldn't be that lucky LOL.

I have an '04 Liberty Sport without factory cruise. I was wondering if any of you had installed the Rostra aftermarket cruise, how difficult was it to install and how well does it work? TIA, I appreciate your feedback.

I just bought an '04 Libby with no cruise. I found the same kit you have and was wondering if you installed it yourself and how complicated it was? I saw what you wrote about the LEDs, I was thinking of doing that too but I'd rather have the cruise and I'd leave the bulbs alone.

I'll be adding a sub also, same place yours is. Does the sub vibrate or rattle the shelf at all?

This is awesome! I'm doing this for sure! Looks great, nice work!

I have the Wildpeaks on my 2009 Outback, they're awesome in the snow. I'm putting the Grabbers on my Liberty tomorrow or Thursday, I expect they will be just as good.

Yeah, I was just thinking ease of install and I'm only doing it for appearance and if I did I'd change the factory bulbs to yellow also. Idk when I would do this, needs other things first, I'm just thinking of ideas for down the road.

I have an ‘04 Sport with the factory fog lights. I want to add a pair of yellow fog lights in the lower bumper openings and I want to know if I can wire them into the factory ones so both pairs are on the same switch.

Thanks! I appreciate your help!

I want to replace my stock suspension and I'd like to do the OME 925/947 upgrade that you guys recommend but I can't find those springs anywhere. I found 926 and 948 springs on Ebay. I want to stay at the stock height as much as possible, I only have a couple inches to spare before it won't fit...

I found a wheel at Discount Tire that is 16x7 with 38mm offset. The guy I spoke with said these match the factory wheels with 5.5" of backspace. Does that sound right to you?

Ok, I'm glad I'm asking you guys, I haven't bought aftermarket wheels before, so I appreciate your help! Can you recommend a wheel that will fit properly? I'd prefer something simple, black, steel. It's not lifted, and I'm replacing the needed suspension parts with OE specs.

I found a 16x7 with a 4" backspace. Would this be ok?

Yeah, I was wondering about that, I should probably shop for an OE size wheel. Do you know what the backspace is on the factory wheel?

I've seen these before but I really like the one you have, it just looks good and has the 2 steps. I searched but didn't see your exact one. Amazon does have a GoRhino one that looks closest to yours. Thanks for the info!

I got the OEM size tires 235/70/16 and 16x8 Rough Country black steel wheels. I am going to get the Moog ball joints for the lower and the Mevotech uppers from Rock Auto. I'm taking it to my mechanic on Saturday to see what all it needs, I may just replace the whole suspension system, not sure...

Where did you get that rear step? I want that! Looks like it just slides into the hitch receiver?