in my investigation of my heat loss i also purchased a endoscopy camera from amazon pretty cheap. i used it look down in the air box and make sure all the doors were working properly. also to make sure a mouse or small rodent had made a nest around the heater core. the camera worked great. all...
i have a 2010 liberty with 85k. i took my cabin filters out years ago. useless in my opinion. i also have battled with no heat on my drivers side. everything in my jeep worked fine. all doors, actuators, and both hoses would get hot. tried a flush with just water didn’t do anything. also burped...
did you ever resolve your luke warm heat problem? i have the same problem. everything i’ve checked is working properly. any info you could give me would be appreciated
Sent from my iPhone using Tapatalk
does anybody have or know where i could hear sound clips of a resonator delete. can't find anything on youtube. only muffler deletes. not sure why you would do that. will a res delete make a big sound difference or is it not a good idea? input or opinions welcome.
thanks
Sent from my...
putting in monroe quick struts and new shocks in rear. jeep has 70k on original suspension. i would have to measure it but with the 1/2" spacers on the strut it seems like there is still quite a bit of the strut there to slide into the clevis. how long would you consider to be an acceptable...
wasn't sure about the 1/2" either. everything i've read says 3/8" is the max for a 3/4" lift. jba sales a 1/2" clevis spacer. i emailed them and their response was the 1/2" will work but not to go any thicker
Sent from my iPhone using Tapatalk
all i want to do is level my 2010 jeep liberty. if the info i've found is right then the factory ride height is 18" in the front 19" in the rear. so i was just gonna put a 1/2" clevis spacer upfront to get the inch of lift i need to level. looking for anyone's opinion on this. good or bad idea...
was wondering if anybody had any info on putting l.e.d bulbs in the jeep liberty kk. is it a good idea or should i just stick with halogen bulbs? are l.e.ds compatible with the halogen reflectors or do they need projector lenses?
Sent from my iPhone using Tapatalk
the instructions from DarkPassenger did end up working. just be persistent. it will eventually work. remote start install was easy an successful. $ well spent an no annoying horn at 6am. thanks DarkPassenger
Sent from my iPhone using Tapatalk
i am going to install a remote start that utilizes my existing key fob. to start jeep you have to push the lock button 3x. so 3 beeps an then it beeps back to acknowledge the request to start. that's 4 beeps at 6am when i would be starting my jeep. kind of disturbing
Sent from my iPhone using...
thanks. any suggestions if that doesn't work? tried it a bunch of times an won't disable the horn. does it matter if your in or outside the jeep. key in ignition or out?
Sent from my iPhone using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.