Recent content by Bama KJ

PM sent. If your springs are not sagging this will work . That is he reasion i had to swap over to OME. I have a ARB bumper with a 12,000 pound winch and i pull a trailer all the time.If you use this you should go and change out your struts. Just helps with the CRD. you have 3.7l struts in the...

Dude i have a 2" bolt on lift kit $100+ shipping. PM me if you wont it

This was like trying to drag a anaconda through a donut hole but it is done. I have seen a 1/2 psi at idle and quicker boost through the whole rpm range. The next thing to do is to paint the welds on the exhaust. I had to put a extinsion on the last exhaust bracket

Here is the header comming from the Turbo. This thing was hard as a rock to turn down the factory weld. Did this last night and will try to finnish the rest up.

Here is a pic of the front JBA upper arms and The OME springs and shocks. The right way to lift a CRD. Oyea The only way Right.

When is the last time the ****** fluid changed . What are the sounds or ****** doing. Slipping ,shuddering ect. And no factory updates. Need info.

Fixing to start on the 3" exhaust for the KJ. 3" from the turbo out. As i build i will take Pics and plan on machining a new flange to go from the turbo to the 3" exhaust pipe. First thing i did is a EGR block off .If you have the GDE program it will work,but is you dont your cel light come on...

Still open for a KJ ride at Wooleys. Any body close.

2nd,3rd that. Do not waist our money on bolt on. OME all the way and check out Boulderbars web sight to. That is where i bought my OME . OME,OME

Any body close to Wooleys in TN. I am an hour away. Looking for a KJ get to geather.

YES STAYAWAY FROM RRO . The CV joints are machined on the inside of the boots so they get more angle out of the Cv axel.

Samco hoses. What he said. Some web site boostcontrol.com maby.