Hi im new so please excuse if things aint done right.
On my 2003 jeepliberty had ABS light on code PO123 . so replaced TPS sensor no change .Checked TpS out puts on vehicle and all as per spec.
Now Cannot get code reader ( 4 different units tried) to link.?
have checked pin 16 on obd connector its good 12 v and checked grounds on pins 4&5 for ground these good, checked fuses 33 and 38 good ,also checked power at cigarette lighter good, further more i do not have ABS on this vecicle ?
Vehicle is running fine gas mileage normal ?
Any further suggestions PLEASE,
On my 2003 jeepliberty had ABS light on code PO123 . so replaced TPS sensor no change .Checked TpS out puts on vehicle and all as per spec.
Now Cannot get code reader ( 4 different units tried) to link.?
have checked pin 16 on obd connector its good 12 v and checked grounds on pins 4&5 for ground these good, checked fuses 33 and 38 good ,also checked power at cigarette lighter good, further more i do not have ABS on this vecicle ?
Vehicle is running fine gas mileage normal ?
Any further suggestions PLEASE,
Last edited: