We just purchased an '06 Liberty and we are constantly having to add oil. Dip stick showing it's low and service station where we bought it says they have no clue where oil is going. Please post if you are also having this issue. Thanks!
'06 Liberty with oil issue
- Thread starter TC59
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Might try changing the PCV valve first if you can't see any clear signs of a leak.
Mixster46
New Member
Oil issue
My shop specializes in 02-07 Liberty Buy/Sell/Repair We sold 30 in the last 12 months. Just saying to give myself credibility. We repair/our own engines in-house. If there is no sign of leaks or oil smoke then you have a valve guide/seal problem. The fix is a set of remann cylinder heads. We buy ours from Clearwater cylinder head on EBAY at 300$ each.
My shop specializes in 02-07 Liberty Buy/Sell/Repair We sold 30 in the last 12 months. Just saying to give myself credibility. We repair/our own engines in-house. If there is no sign of leaks or oil smoke then you have a valve guide/seal problem. The fix is a set of remann cylinder heads. We buy ours from Clearwater cylinder head on EBAY at 300$ each.
LibOhToo
New Member
I am having similar issue at 88k.
Replaced PCV.
Replaced a couple dry rotted hoses in that area.
Just changed oil and went with High Mileage 5-30.
No evidence of oil leaking anywhere.
No noticeable blue smoke.
Using about 1qt per 1000 miles.
Replaced PCV.
Replaced a couple dry rotted hoses in that area.
Just changed oil and went with High Mileage 5-30.
No evidence of oil leaking anywhere.
No noticeable blue smoke.
Using about 1qt per 1000 miles.
