PDA

View Full Version : Code P 0039?


Jeepetorp
07-31-2008, 02:38 AM
What does that mean? Itīs a -05 KJ CRD Sport.
Yesterday I was driving at about 55-60 mph, and did a kickdown to pass a horsetrailer. After that I go back to 55-60 mph and everything was OK. When I was doing the same again, one minute later, the kickdown get the transmition to shift down as usual, but ther were no power from the engine. It was like driving whithout touching the gas pedal more than one cm.
I stopped the Jeep and whith the gear in neutral it wouldnīt go more than 3500 rpm, and it was taking longer time to reach that rpm.
I stopped the engine and looked wor anything unusual, and shecked every connections, hoses and what ever could be loose. Nothin strange there. When I started, it was back to normal again.
Notice: It is ecuipped whith Ferritas trim box.
When I turn on and off the ignition key four times, and stay in ACC, the code P0039 lites up. What can that means?

Jeepetorp
07-31-2008, 04:26 AM
Iīve found it.
Some turbo sensor something.....

Someone know how to reset the failure code?

TonyCRD
07-31-2008, 10:19 AM
I think you need to clean your boost pressure sensor....

see here (http://www.ausjeepoffroad.com/forum/showthread.php?p=739015#post739015)